ARMY LO 5-4310-452-12
MARINE CORPS LI08917A-12
30 Jul 1987
Ingersoll-Rand Model P-250-WDM-H268
COMPONENT OF PNEUMATIC TOOL AND
Reference TM 5-4310-452-14&P/TM 08917A-14&P
Intervals (on condition or hard time) and the
or equivalent. Dry before lubricating.
r e l a t e d man-hour times are based on
Dotted arrow points indicate lubrication on
normal operation. The man-hour time
both sides of the equipment.
specified is the time you need to do all the
services prescribed for a particular interval.
Level of maintenance. The lowest level of
On-condition (OC) oil sample intervals
maintenance authorized to lubricate a
shall be applied unless changed by the
point is indicated by one of the following
A r m y Oil Analysis Program (AOAP)
symbols as appropriate: Operator/Crew
laboratory. Change the hard time interval if
(C); and Organizational Maintenance (O).
are operating the equipment under adverse
Reporting errors and recommending
operating conditions, including longer-
improvements. You can help improve this
than-usual operating hours. The hard time
manual. If you find any mistakes or if you
interval may be extended during periods of
know of a way to improve the procedures,
low activity. If extended, adequate
preservation precautions must be taken.
please let us know. Mail your letter or DA
Form 2028 (Recommended Changes to
Hard time intervals will be applied in the
Publications and Blank forms) direct to:
event AOAP laboratory support is not
Commander, US Army Tank-Automotive
Command, ATTN: AMSTA-MB, Warren, Ml
48397-5000. A reply will be furnished to
Clean fittings before lubricating. Clean
parts with dry cleaning solvent (SD), type II
Marine Corps Personnel submit NAV-MO 10772
to Commanding General, Marine Corps Logistics
Base, Code 850, Albany, GA 31704-5000.
Approved for Public Release; distribution unlimited
CARD 1 OF 8