• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Generator Drive Belt and Guard
Generator and Mounting Bracket

TM-5-4310-227-15 Compressor Reciprocating: Air; Gasoline Engine 15 CFM 175 PSI; Receiver Mounted (Champion Pneumatic Model OEG-458-ENG-1) Manual
Page Navigation
  61    62    63    64    65  66  67    68    69    70    71  
TM 5-4310-227-15
21  Electrical lead
11
Screw
1 Starter
22  Generator
12
Air shroud
2 Screw
23  Ground
13
Generator drive belt
3 Engine
24  Cable
14
Starting pulley
4 Spacer
25  Voltage regulator
Generator drive belt guard
15
5 Starter mounting bracket
26  Screw
Generator pulley
16
6 Nut
27  Mounting bracket
17
Screw
7 Starter guard
28  Screw
Ground strap
18
8 Screw
29  Adjustment strap
19
Screw
9 Screw
Electrical lead
20
10 Bracket
Figure 3-14. Generator drive belt guard, generator, starter, and regulator,
model BMW-452-NEG-1, removal points.
and capacitors (3) to the generator
in the output indicates a defect in the
and  regulator  mounting  bracket
regulator. Replace a defective regu-
(8) and remove the capacitors, shock
lator (b through f below).
mount, and voltage regulator (4).
b. Removal (Model BMW-452-ENG).
(3) Remove the screws (1) and lockwash-
(1) Tag and disconnect applicable elec-
ers that secure the voltage regulator
trical leads (2, fig. 3-15).
(4) to the shock mount (5) and re-
move the voltage regulator from the
(2) Remove the screws (9) and lockwash-
shock mount.
ers that secure the shock mount (5)
3-39






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.