Reassembly and Installation.
(6) Remove the hand truck assembly in nu-
C.
merical sequence as illustrated in figure 26.
(1) Reassemble and install the hand truck as-
sembly in the reverse order of that shown
b. Cleaning, Inspection, and Repair.
in figure 26.
(1) Clean all parts in an approved cleaning sol-
(2) Install the wheel assemblies (para 81).
vent and dry thoroughly.
(3) Install the air receiver tank (para 74).
(2) Inspect all parts for cracks, breaks, bends,
(4) Install the fuel tank (para 60).
and other damage.
(5) Install the engine (para 57)
(6) Install the air compressor (para 65).
(3) Repair or replace all unserviceable parts.
43
