TM 5-4310-276-14
Section III.
5-8.
G e n e r a l Repair and/or Replace-
General
ment Criteria
Refer to Chapters 3 and 4 for operator and or-
a. In-process inspection shall be performed on
ganization preventive maintenance checks and
each assembly, subassembly and component parts
services.
being repaired to insure strict adherence to criteria
established by this manual.
5-7.
General Disassembly Pro-
b. Welding shall assure complete fusion and
cedures
penetration and be in compliance with specifica-
a. Components to be repaired shall be disassem-
tions and standards referenced herein.
bled to the extent required for complete ser-
viceability.
5-9.
G e n e r a l Reassembly Procedures
b. Serviceable, precision, matched or mated
a. General precautions shall be adhered to dur-
parts shall be marked, handled and stored to pre-
ing reassembly to insure that all internal parts
clude damage and to insure reassembly and instal-
have been properly installed and necessary toler-
lation in their matched and mated positions in the
ance checks performed.
same assembly or component.
b. Upon completion of reassembly, unit shall be
lubricated in accordance with Lubrication Order.