Reassembly and Installation. - TM-5-4310-276-140129

Figure 6-21. Crankcase, Disassembly and Reassembly

Figure 6.22. Contact Assembly Adjustment

TM-5-4310-276-14 Compressor Reciprocating: Air: Handtruck Mounted Gasoline Engine Driven 5 CFM 175 PSI (KELLOGG American Model G-311-PC) Manual
Page Navigation
106

TM 5-4310-276-14

(11) Install oil pan (para. 6-2).

(3) Repair or replace any damaged or de-

fective part.

(12) Install contact assembly and capacitor

and tighten screws.

c. Reassembly and Installation.

(a) Connect electrical leads.

(1) Install expansion plug (9, fig. 6-21) and

(b) Install accessory case cover and snap

studs (8) ,

spring clips closed.

(2) Install O-ring (7) in Model 1A08-3.

(3) Install packing (5), plug (6), packing (3),

(13) Install the exhaust manifold-muffler, du-

cts, and covers (para. 6-9).

and plug (2) in Models 1A08-1 and 1A08-2.

(14) Install the engine speed governor control

(4) Install needle bearing (1).

(para. 6-4).

(5) Install the crankshaft assembly (para. 6-

21).

(15) Install intake manifold and air cleaner

assembly (para. 6-8).

(6) Install the camshaft and valve tappets

(para. 6-19).

(16) Refer to table 4-2 and install the carbu-

retor and throttle controls.

(7) Install bearing cap assembly (para. 6-17).

(8) Install piston and connecting rod assembly

(17) Using a new gasket, install the fuel pump

(para. 6-14).

and connect fuel lines.

(18) Screw fuel filter onto fuel pump and con-

(9) Install flywheel-fan (para. 6-6).

nect fuel lines.

(10) Install rocker arms, cylinder head, push-

(19) Install engine on compressor unit and at-

rods and housing, valves and valve springs (para. 6-

11).

tach with mounting bolts.

(20) Service crankcase.

(21) Install V-belts and V-belt guard.

(22) Adjust the contact assembly (fig. 6-22).

6-27

Privacy Statement
Press Release
Contact