ENGINE DRIVEN, 125 CFM, 100 PSIG
(DAVEL MODEL 6M125)
Reference; Sm 10-1C4-1
Intervals and related task-hour timed are based on
Dry before lubricating. Drain crankcase when HOT.
normal hours of operation. The task-hour time
Fill and check level.
The lowest level of
specified is the time you need to do all the services
maintenance authorized to lubricate a point is
prescribed for a particular interval. Change the
indicated by one of the following: (C) Operator/crew;
interval if your lubricants are contaminated or if you
or (O) Organizational Maintenance.
are operating the equipment under adverse
operating conditions, including longer-than-usual
operating hours. You may extend the interval during
periods of low activity, but you must take adequate
Clean fittings before lubricating. Lubricate points
The time specified is the time required to perform all
indicated by dotted arrow shaft on both sides of
services at the particular interval.
Clean parts with SOLVENT, dry
cleaning, or with OIL, fuel diesel.
(Figure 3-1 Sheet 1 of 2)
(Figure 3-1 Sheet 2 of 2)
Figure 3-1. Lubrication Order (Sheet 1 of 2)
L/O LAYOUT SHEET
1 Dec 76
I U.S. Government Printing Office: 1977 765-007/2002 Region No. 6