Table 4-2. Organizational Troubleshooting - Continued
TEST OR INSPECTION
26. INSTRUMENT PANEL LAMP DOES NOT FUNCTION.
Step 1. Check for burned out bulb.
Remove lamp cover, lens, and replace the bulb.
Step 2. Check wire connections at lamp assembly and lamp switch.
Tighten connections as necessary. Replace any defective wires.
Step 3. Check for defective lamp switch or defective lamp assembly.
Section VII. MAINTENANCE OF EXHAUST MUFFLER GROUP
4-20. General. The exhaust muffler group consists of
4-21. Exhaust Muffler Group.
a. Removal and Disassembly. Remove the rain
cap, exhaust muffler and piping from engine exhaust