(2) Inspect the fuel pump rocker arm for free
Check that priming lever
operates freely without binding. Inspect
Dry cleaning solvent, P-D-680, used
for any crack, breaks, damaged threads,
or any other damage.
Avoid repeated and
(3) Inspect fuel line for crack, kinks, missing
prolonged skin contact. Do not use
eyelet, damaged threads, or any other
near open flame or excessive heat.
Inspect fuel line fittings to
Flash point of solvent is 100 F-138 F
ensure they are clear of any obstructions
(38 C-59 C).
and that threads are not damaged.
b. Cleaning and Inspection.
c. Installation. Install the fuel transfer pump as
(1) Wipe the exterior of the fuel transfer pump
with a clean cloth dampened with solvent,
4-44. Fuel Injection Lines.
Federal Specification P-D-680, Type II.
a. Removal. Remove the fuel injection lines as