TM 5-4310-354-14
4-59. Engine Fuel Pressure Gauge.
4-60. Quick-Start Control Cable.
a. Removal. Remove the engine fuel pressure
a. Removal. Remove the Quick-Start control cable
gauge as shown in F, figure 4-34.
as shown in G, figure 4-34.
WARNING
WARNING
Dry cleaning solvent, P-D-680, used
Dry cleaning solvent, P-D-680, used
to
clean
parts
is
potentially
to
clean
parts
is
potentially
dangerous
to
personnel
and
dangerous
to
personnel
and
property.
Avoid repeated and
property.
Avoid repeated and
prolonged skin contact. Do not use
prolonged skin contact. Do not use
near open flame or excessive heat.
near open flame or excessive heat.
Flash point of solvent is 100 F-130 F
Flash point of solvent is 100 F-138 F
(38 C-59 C).
(38 C-59 C).
b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Wipe the gauge with a cloth dampened
(1) Clean the control cable with solvent,
with solvent, Federal Specification P-D-
Federal Specification P-D-680, Type II.
680, Type II. Dry thoroughly.
Dry thoroughly.
(2) Inspect the gauge face for damage.
(2) Inspect the control cable for breaks, kinks,
Inspect case for distortion, cracks, or any
or any other defect.
other defect.
(3) Inspect attaching hardware for distortion,
(3) Inspect attaching hardware for distortion,
damaged threads, or any other defect.
damaged threads, or any other defect.
c. Installation. Install the Quick-Start control cable
c. Installation. Install the engine fuel pressure
as shown in G, figure 4-34.
gauge as shown in F, figure 4-34.
4-70