• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Chapter 3. OPERATOR'S MAINTENANCE INSTRUCTIONS - TM-5-4310-360-140029
Figure 3-2. Lubrication order, engine (Card 1 of 2).

TM-5-4310-360-14 Compressor Reciprocating: Air: Handtruck Mounted Gasoline Engine Driven 5 CFM 175 PSI (C & H Distributors Model 20-902/3) Manual
Page Navigation
  16    17    18    19    20  21  22    23    24    25    26  
TM 5-4310-360-14
3-3.
Engine Lubrication - continued.
INTERVAL LUBRICANT
LUBRICANT
INTERVAL
*TOTAL TASK HOURS
*TOTAL TASK HOURS
TASK-HOURS
INTERVAL
TASK-HOURS
INTERVAL
0.5
Q
0.5
D
1.5
A
0.5
W
-KEY-
EXPECTED TEMPERATURES
Above +32F +40F to -10F
0Fto-65F
INTERVALS
+ 5C to-23C -18C to-50C
Above 0C
CAPACITY
LUBRICANTS
D 10 Hours
OE/HDO OIL, Engines, Heavy
or Daily
Duty
W 50 Hours
(MIL-L-2104C) Crankcase
OEA/APG-
Q 250 Hours
1 qt. .946 liters OE,/HDO 30
OE/APG-PD-1
OEA/APG-PD-1 Oil Engine
or Quarterly
PG-1
Sub Zero
A 1000 Hours
SD2 Solvent
or Annually
CP-D-680 dry cleaning
NOTES:
1. FOR OPERATION OF EQUIPMENT IN PRO-
TRACTED COLD TEMPERATURES BELOW -10F
-23C. Remove lubricants prescribed in the key for
temperatures above  -10F -23C. Clean parts with
SOLVENT dry-cleaning (P-D-680). Relubricate with
lubricants specified in the key for temperatures below
-10F -23C.
2. WHEEL BEARINGS. Every 1000 hours remove wheels,
clean and inspect all parts, replace damaged or worn parts,
repack bearings, and reassemble.
Figure 3-1. Compressor lubrication.
3-2






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.