• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
LOW PRESSURE CYLINDERS
Section IV. PISTONS, CRANKSHAFT AND CENTRIFUGAL UNLOADER MAINTENANCE INSTRUCTIONS MODEL 20-904

TM-5-4310-362-14 Compressor Reciprocating Air: Electric Motor Driven 5 CFM 175 PSI Model 20-904 Manual
Page Navigation
  73    74    75    76    77  78  79    80    81    82    83  
TM 5-4310-362-14
CYLINDER HEAD AND VALVES MODEL 20-911 (Cont)
LOCATION/ITEM
ACTION
REMARKS
8-13E ASSEMBLY
HIGH PRESSURE
HIGH PRESSURE
CYLINDER
CYLINDER
1.
Gasket (1)
Place into position over cylinder
(2).
2.
Cylinder head (3)
Place into position over gasket (1).
3.
Capscrews (4)
Thread into cylinder and tighten
evenly.
4.
Gaskets (5)
Install.
CAUTION
Do not mix up inlet and discharge
valve assemblies. They are not
interchangeable.
5.
Valve assemblies (6)
Install.
and (7)
6.
Valve retainers (8)
Screw into cylinder head and
tighten.
7.
Gaskets (9)
Install.
8.
Valve chamber caps (10)
Screw into cylinder head and
tighten.
8-16.4 Change 1






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.