TM 5-4310-367-14
FUEL SYSTEM continued
LOCATION/lTEM
ACTION
REMARKS
4-15. CLEANING, INSPECTION AND REPAIR continued.
5. Strainer (5)
a. Clean with drycleaning
solvent, P-D-680.
b. Inspect screen for cuts or
large holes which would
allow dirt to get into the
tank.
Replace if damaged.
c.
4-16. ASSEMBLY.
1.
2 brackets ( 1 )
Install on both ends of tank
(2).
2. Strainer (3), gasket (4)
Install on fill opening of tank
and cap (5)
(2).
3. Tank (2)
Install on handtruck with
two screws (6), washers (7)
and nuts (8).
4. Elbow (9)
Install in bottom of tank (2).
5. Elbow (10)
Install in the inlet to the fuel
strainer on the engine.
Install between elbows (9)
6.
Tube(n)
and (10).
Install in bottom of tank (2).
7. Plug (12)
4-14
