TM 5-4310-369-14
NOTE
Axle and Wheels
The axle is a cylindrical steel rod used to attach the
Refer to LO 5-2805-256-12.
wheel assemblies to the handtruck assembly.
a. Removal.
(2) Assemble hubs (8), bearings (4), thrust washers
(1) Jack up the axle end of the handtruck and
(1), felt washers (2) and end caps (3).
block securely under the bumper or rails.
(3) Install wheel on axle. Install washers (1 and 2)
and roll pin (6).
(1 and 2). Pull wheels from axle.
(4) Service the tires to 25 psi (1.766 kg/sq cm).
(3) Remove bushing (11).
(5) Remove the blocking and lower the jack.
(4) Disassemble end caps (3), felt washer (2), thrust
washers, roller bearings (4) and hubs (8).
Wheels and Tires
(5) Remove axle (12).
The compressor assembly is mounted on a handtruck,
(6) Inspect axle for cracks or bends. Replace axle
equipped with two rubber tire wheels with roller bearings
if damaged beyond usage.
mounted on the truck axle hub.
(7) Check nylon bushing (11) for wear.
a. Removal.
(8) Clean all parts with dry cleaner.
(1) Jack up the
axle end of the
compressor assembly
b. Installation.
and block securely.
(1) Install axle on handtruck with nylon bushings
(11).
and 2) to remove wheel.
Change 1