+40F to -10F
0F to -65F
are in hrs. of
For Operation in Protracted Cold Temperatures Below -10F. Remove lubricants prescribed in the
key for temperatures above -10 F.
Relubricate with lubricants specified in the key for
temperatures below -10 F.
Lubricants. The following is a list of lubricants with the Military Symbols and applicable
FIGURE 3-1. LUBRICATION CHART
b. Where motor is used constantly in very dirty, wet, or corrosive atmospheres, add one quarter ounce of grease for
each of two bearings every three months.
c. To grease motor, use standard grease gun; and grease at points shown in Figure 3-2.