Breather Tube Assembly
Left L.P. Intake Manifold
Right H.P. Intake Manifold
Straight Compression Body
Release Valve Tube Assembly
Left H.P. Exhaust Manifold
Release Valve Tube
FIGURE 5-5. MANIFOLD AND TUBING ASSEMBLIES
b. Cleaning, Inspection, Repair or Replacement of Parts
Dry cleaning solvent, P-D-680, used to clean parts is potentially dangerous to
personnel and property. Use in well ventilated area as the fumes are dangerous if
inhaled. Avoid repeated and prolonged skin contact. Do not use near open flame
or excessive heat. Flash point of solvent is 100 F 138 F (38 C 59 C).
(1) All parts to be thoroughly cleaned with P-D-680 solvent, and then air dried.