• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
FIGURE 5-5. MANIFOLD AND TUBING ASSEMBLIES
Air Inlet Filters and Tubing

TM-5-4310-371-14 Compressor Unit Reciprocating Electric 25 CFM 175 PSI (4310-01-090-5911) Manual
Page Navigation
  57    58    59    60    61  62  63    64    65    66    67  
TM 5-4310-371-14
(2) Inspect all parts for cracks, breaks, fissures, scores, distortions or any other damage.
(3) Repair or replace any damaged parts.
c. Reassembly
(1) Unloader Muffler Assembly
(a) Unloader Muffler Reassembly Order
1 Felt filter (figure 5-5, item 19)
2 Screen (figure 5-5, item 18)
3 Unloader muffler body (figure 5-5, item 17)
(b) Install unloader muffler assembly (figure 5-5, item 16)
(2) Manifold Assemblies
(a) Install right low pressure exhaust manifold (figure 5-5, item 14) by turning manifold screws
(figure 5-5, item 11) clockwise.
(b) Install right high pressure intake manifold (figure 5-5, item 13) by turning manifold screws
(figure 5-5, item 11) clockwise.
(c) Install right low pressure intake manifold (figure 5-4, item 18) by turning manifold screws
(figure 5-4, item 12) clockwise.
(d) Install right high pressure exhaust manifold (figure 5-4, item 17) by turning manifold screws
(figure 5-4, item 12) clockwise.
(e) Install left high pressure intake manifold (figure 5-4, item 16) by turning manifold screws
(figure 5-4, item 12) clockwise.
(f) Install left low pressure exhaust manifold (figure 5-4, item 15) by turning manifold screws
(figure 5-4, item 12) clockwise.
(g) Install left high pressure exhaust manifold (figure 5-4, item 14 and figure 5-5, item 15). Turn manifold
screws (figure 5-4, item 12 and figure 5-5, item 11) clockwise.
(h) Install left low pressure intake manifold (figure 5-4, item 13 and figure 5-5, item 4). Turn manifold
screws (figure 5-4, item 12 and figure 5-5, item 11) clockwise.
(j) Install safety valves (figure 5-4, item 11 and figure 5-5, item 11) on to right high pressure intake
manifold (figure 5-5, item 7) and left high pressure intake manifold (figure 5-4, item 16).
(k) Install pipe plug (figure 5-4, item 10) into aftercooler manifold (figure 5-4, item 7) if aftercooler
manifold has been disassembled for cleaning.
5-20






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.