TM 5-4310-373-14
This task covers:
The disassembly of the electric motor.
INITIAL SETUP
Equipment Condition:
Tools:
Electric motor removed from unit
Materials/Parts:
As required
Approximate Time Required (minutes):
Personnel Required:
45
1 Mechanic
REMARKS
ACTION
LOCATION/lTEM
See para 4-42.
Remove from unit.
1. Motor
Remove 4 each.
2. Nuts (1)
See Figure 5-8.
Mark them.
So they can be correctly positioned during assembly.
3. End bells (3) and (7)
Remove.
4. Thru bolts (2)
Remove by prying loose with
5. End bell (3)
thin tool.
Remove.
6. Wavy washer (4)
Remove.
7. Rotor assembly (5)
Remove.
8. Baffle (6)
Remove by prying loose with
9. End bell (7)
thin tool.
Remove.
10. Shim (8)
Remove from rotor assembly
11. Bearings (9)
with bearing puller.
Fan will be damaged if attempt is made to remove it.
NOTE
12. Fan (10)
Fan is not removable.
Remove.
13. Screws (11)
Remove from motor frame
14. Conduit box (12)
(13).
5-20