TM 5-4310-376-14
4-32. GOVERNOR - Continued
REMARKS
ACTION
LOCATION/lTEM
Idle
a. Make final carburetor mixture adjustments.
b. Place lever (2) in idle position.
c. Hold throttle shaft in closed position,
adjust idle speed screw (5) to 1550
RPM and release throttle.
d. Set control lever (2) to 1750 RPM.
Turn screw (1) until it contacts control
lever (2).
1 . Governor
a. Tilt governor plate (6) to install
governor rod (7).
b. Install 2 bolts (5) to secure governor
plate (6) to engine housing.
c. Install governor lever (3) on governor
shaft (4).
d. Install pneumatic cylinder (para 4-20).
2 . Governor
a. Replace governor gear (para 5-26).
gear
b. Install crankcase cover (para 5-6).
4-71
