3-1.9. OIL FILLER CAP, PLUG, AND SIGHT GAGE -Continued.
Figure 3-23. Oil Filler Cap, Plug, and Sight Gage, Removal.
(1) Remove oil filler cap (1).
(2) Remove oil plug (2), elbow (3), and nipple (4).
(3) Remove oil sight gage (5) and gage seal (6) from the crankcase
(7) Discard seal (6).
(1) Remove all buildup of dirt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use
solvent only in a well-ventilated area. Avoid prolonged breathing of fumes. Keep
solvent away from flames. Do not use in excessive amounts. Avoid skin contact.
(3) Allow to dry.
GO TO NEXT PAGE