TM 5-4310-377-13
3-23. SAFETY VALVE.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Replace
e. Installation
SET-UP:
Tools:
3/4 inch Wrench
Materials:
Brush, Medium Bristle (Appendix E, item 4)
Cloth, Lint-Free (Appendix E, item 3)
Solvent, Dry Cleaning (Appendix E, item 2)
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use
solvent only in a well-ventilated area. Avoid prolonged breathing of fumes. Keep
solvent away from flames. Do not use in excessive amounts. Avoid skin contact.
Personnel: 1 Person
Equipment Conditions:
Electrical power removed at master control panel.
Tank drain cock open and air bleed off (para. 2-2).
Figure 3-33. Safety Valve, Removal.
GO TO NEXT PAGE
3-63