TM 5-4310-379-14
4-22. Power Take-off Assembly.
This task covers:
a.
Adjust
c.
Replace
INITIAL SETUP:
Tools
Equipment Condition
General Mechanic's Tool Kit
(NSN 5180-00-177-7033)
Drive belts removed (para.
3-12).
Puller Kit, Mechanical (NSN 5120-00-033-5606)
a.
Adjust. (figure 4-26)
(1)
Remove two screws (1) and remove access plate (2) and gasket (3).
CAUTION
Do not drop screw, washer or lock in PTO housing. The PTO housing will have to be removed to retrieve
the hardware.
(2)
Remove screw (4) and lockwasher (5) and remove lock (6).
(3)
Disengage PTO.
(4)
The pressure required to engage the PTO clutch is 60 lbs (267 N).
(5)
Adjust pressure by turning adjusting ring (7) clockwise to loosen PTO clutch or counterclockwise to tighten.
(6)
Install lock (6) and secure with screw (4) and lockwasher (5).
(7)
Install access plate (2) and gasket (3) and secure with two screws (1).
4-64
