TM 5-4310-379-14
5-28. Compressor Unloader Assembly (Cont).
d.
Installation Unloader with 6 Bolt Flange. (figure 5-39)
(1)
Install unloader valve (1) with gasket (2) in cylinder head (3).
(2)
Install insert (4) into cover plate (5).
(3)
Install cover plate (5) with gasket (6) and secure with six screws (7). Torque screws to 50 Ib-ft (68 Nm).
(4)
Install piston unloader (8) into unloader (9).
(5)
Install unloader (9) with gasket (10) and secure using diaphragm body removal tool.
(6)
Install tee (11) on unloader (9).
(7)
Install copper tube (12) on fitting (13) and tighten coupling nut (14).
(8)
Install copper tube (15) on tee (11) and tighten coupling nut (16).
(9)
Install copper tube (17) on tee (11) and tighten coupling nut (18).
Change 1 5-126
