TM 5-4310-380-13
3-15. DRIVE PULLEY.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Repair
e. Installation
SET-UP:
Tools:
5 mm allen wrench
Gear puller
Materials:
Brush, Medium Bristle (Appendix E, item 4)
Cloth, Lint-Free (Appendix E, item 3)
Solvent, Dry Cleaning (Appendix E, item 2)
Grease (Appendix E, item 6)
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
Personnel:
1 Person
Equipment Conditions:
Electrical power removed at master control panel.
Tank drain cock open and air bled off (para. 2-4) .
Guard assembly removed (para. 3-13a).
Drive belts removed (para. 3-14a).
GO TO NEXT PAGE
3-28
