TM 5-4310-382-13
3-21. CARBURETOR.
This task covers:
a. Removal
b. Installation
c. Adjustment
INITIAL SETUP
Tools Required
Tool Kit, General Mechanic's
Materials Required
Brush, Medium Bristle (item 4, Appendix E)
Solvent, Dry Cleaning (item 2, Appendix E)
Cloth, Lint-Free (item 3, Appendix E)
Compound, Anti-seize (item 7, Appendix E)
Equipment Condition
Engine shut down and cool.
Air cleaner assembly removed (see para 3-20).
a. Removal.
(1) Remove clamp (9), hose (10), and barbed fitting (8) from carburetor (5).
(2) Remove two bolts (1), two screws (4), elbow (2), gasket (3), and gasket (11).
(3) Remove screw (6) from carburetor (5).
(4) Disconnect breather tube (7) and linkage from carburetor (5) and remove carburetor.
b. Installation.
NOTE
Apply anti-seize compound (item 7, Appendix E) to all pipe threads of assembly.
Always replace all gaskets with new gaskets during installation.
(1) Place carburetor (5) into position and attach breather tube (7) and linkage.
(2) Install screw (6) into carburetor (5).
(3) Install gasket (11), gasket (3), elbow (2), two screws (4), and two bolts (1).
3-38