• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVAL. - TM-5-4310-384-13_99
SECTION VII.  PREPARATION FOR STORAGE - TM-5-4310-384-13_101

TM-5-4310-384-13 Air Compressor Rotary Gasoline Engine Driven 60 CFM 6.0 PSI C & H Model 20-920 Manual
Page Navigation
  89    90    91    92    93  94  95    96    97    98    99  
TM 5-4310-384-13 DESICCANT REPLACEMENT. CAUTION Replace desiccant after 100 hours or quarterly, whichever comes first. Replace desiccant every 50 hours under extreme humid conditions. NOTE Desiccant will change in color from light tan to brown when saturated and must be replaced. This desiccant is not regenerative.  Discard after use. NOTE Take care that no desiccant enters siphon tube.  Refer to illustration. a. Fill bowl (3) with desiccant taking care that no desiccant is allowed to enter siphon tube (7). b. Shake  or  tap  bowl  (3)to  settle  desiccant.    Add  or  remove  until  desiccant  level  is  1/8"  below  inner  shoulder  of bowl. INSTALLATION. a. Screw cover (5) to mounting. b. Install bowl (3) to cover (5) using clamp ring (4). NOTE Be sure clamp ring is securely locked in place before operating air compressor. c. Install discharge hose (2).  Use anti-seize on fittings. d. Turn shutoff valve (1) counterclockwise to open air supply. e. Turn compressor on. 3-71







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.