TM 5-4310-386-14
4-23.
Compressor Fanwheel Guard
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Beltguard removed (para. 4-15).
Compressor drive belts removed (para. 4-20).
Materials/Parts
Fanwheel Guard
Replace. (figure 4-26)
(1)
Remove eye fitting (1) and washer (2).
(2)
Remove four hex screws (3) and washers (4) from fanwheel guard (5).
(3)
Remove fanwheel guard (5) from compressor (6).
(4)
Install fanwheel guard (5) on compressor (6) and secure with four hex screws (3) and washer (4).
(5)
Install eye fitting (1) and washer (2).
FOLLOW-ON MAINTENANCE
(1) Install compressor driver belts (para. 4-20).
(2) Install beltguard (para. 4-15).
4-64
