TM 5-4310-386-14
6-15. Compressor Eccentric Shaft (Cont).
b.
Repair. (figure 6-17)
(1)
Remove compressor eccentric shaft (para. a. above).
WARNING
Cleanliness is imperative in maintaining and handling diving system components. All tools and
parts must be kept free of oil, grease, rust, or other contamination in accordance with Chapter 4,
Section VII of this manual. Foreign substances within an assembly could result in equipment
failure and possible injury or death to personnel.
(2)
Clean eccentric shaft (1) in accordance with Chapter 4, Section VII.
(3)
Inspect eccentric shaft (1) for scoring or pitting and wear on bearing (2).
(4)
Replace eccentric shaft (1) if scored or pitted and if bearing is worn excessively.
(5)
Install compressor eccentric shaft (para. a. above).
FOLLOW-ON MAINTENANCE
(1) Install oil pump (para. 5-33).
(2) Install compressor upper crankcase (para. 6-11).
6-42
