TM 5-4310-389-14
4-27. INSTRUMENTS AND CONTROL PANEL ASSEMBLY (VALVES)
DESCRIPTION
This task covers:
Repair
INITIAL SETUP
Tools:
Equipment condition:
General Mechanic Tool Kit
Equipment secured (paragraph 2-11)
Bleed system pressure
Materials/parts:
(paragraph 2-3, b)
Cloth, Lint-free, item 9 Appendix E
Detergent, Non-ionic, item 13 Appendix E
Teflon Tape, item 30 Appendix E
Water, Distilled, item 32 Appendix E
WARNING
Cleanliness is imperative in maintaining and handling diving system components. All tools and parts
must be kept free of oil, grease, rust, or other contamination in accordance with accepted Army diving
cleaning procedures. Foreign substances within an assembly could result in equipment failure and
possible injury or death to personnel.
WARNING
Any break in air system integrity can cause contamination of the air system. Serious injury or death
may result due to air system contamination. Follow Army diving cleaning procedures to maintain air
system integrity.
REPAIR
Service Line Valve
a.
Removal.
1.
Remove instrument rear panel.
4-121
