TM-5-4310-389-14
9.
Press in the bearing bushing from the front side; do not permit it to get out of square (use removing and
replace tool No. 003-0433). Figure 5-79 shows the installation of the bearing bushing.
Figure 5-79. Removal/Reinstallation of Bearing Bushing
NOTE
Press in the bearing bushing so that it seats flush with the front end.
REPLACE REPAIR
a.
Camshaft reinstallation.
1.
Slightly oil the tappets, install and retain them in position (figure 5-80).
2.
Install the camshaft from the front (opposite the flywheel end) into the bearing bores (figure 5-81).
Figure 5-80. Installing Tappets
Figure 5-81. Installing Camshaft
5-49
