TM 5-4310-451-14
4-102. AIR COMPRESSOR AIR CLEANER AIR CLEANER ASSEMBLY MAINTENANCE (Con’t)
9.
Have an assistant support air cleaner assembly
(19). Remove two nuts (35) and bolts (34) and
let two clamps (32) open. Remove air cleaner
assembly from clamps.
NOTE
Each clamp Is removed same way.
10.
If damaged, remove two nuts (30), screws (33),
and clamp (32) from support (31).
c. AIR CLEANER ASSEMBLY INSTALLATION
NOTE
Each clamp Is Installed same way.
1.
If removed, install clamp (32) on support (31) with two screws (33) and nuts (30).
2.
Position air cleaner assembly (19) in two clamps (32). Install two bolts (34) and nuts (35) into two clamps (32).
Tighten clamps to secure air cleaner assembly.
3.
Install new gasket (28), air inlet valve (27), new gasket (24), and adapter duct (18) on air compressor (29) with
eight new lockwashers (23) and screws (22).
4.
Position inlet valve lever (25) on inlet valve (27) and tighten setscrew (26).
TA704895
4-251
