TM 5-4310-451-14
5-32. MAIN BEARINGS AND CRANKSHAFT MAINTENANCE (Con’t).
27.
Install front and rear bearing caps (16 and 17).
28.
Install four bolts (14) and washers (15) in front and rear bearing caps (16 and 17).
29.
Tap front and rear bearing caps (16 and 17) with soft-faced hammer and torque four bolts (14) to 180-190 lb.-
ft.(244-258 N-m).
30.
Check runout by repeating steps 9 and 10. If runout is still too high, replace crankshaft.
31.
Perform steps 12 through 17.
TA704961
5-80
