TM 5-4310-451-14
5-70. VARIABLE SPEED GOVERNOR HOUSING REPAIR (Con’t)
9.
Install adjusting screw (40) and nut (39) in lever
(38).
10.
Tighten nut (39) so length of adjusting screw
(40) is same as noted In subparagraph a, step
24.
11.
Install pin (37) in lever (38).
12.
Install upper bearing (29), with open side of
bearing facing up, on shaft (28).
13.
Install lever (38) on shaft (28) until flush with top
of shaft.
14.
Install shaft (28) and position lever (38) so
adjusting screw (40) makes contact with housing
(1).
5-268
