TM 5-4310-451-14
5-73. ALTERNATOR TESTING AND REPAIR (Con’t).
c. DISASSEMBLY
1.
Remove capscrew (15) and retainer bracket (14) from connector body (13).
2.
Push in on lock tab (12) and remove connector body (13) from slip ring end frame (2).
3.
Remove four screws (1) from slip ring end frame (2).
4.
Remove slip ring end frame (2) from drive end frame (4).
5.
If bearing will not be replaced, place a piece of masking tape over drive end frame (4) bearing to prevent entry of
dirt and foreign material.
5-287
