TM 5-4310-452-14
4-84. COMPRESSOR OIL FILTER ELEMENT REPLACEMENT.
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Materials/Parts:
• Engine off.
• Lubricating oil (Item 9, Appendix E)
• Air pressure relieved.
• One oil filter element
• Right door assembly open.
References:
Tools/Test Equipment :
• LO 5-4310-452-12
• General mechanic's tool kit
a. REMOVAL
1.
Remove compressor oil filter element (3) and gasket (2) from filter head (1). Discard oil filter element and
gasket.
b. INSTALLATION
1.
Apply a thin coat of lubricating oil on new gasket
(2).
2.
Install new oil filter element (3) and gasket (2)
on filter head (1) until gasket contacts filter
head, then tighten 3/4-turn more.
3.
Check compressor oil level in sight gage and fill
if necessary (see LO 5-4310-452-12).
4.
Start engine and check oil filter element (3) for
leaks (see paragraph 2-12).
TA 505531
FOLLOW-ON TASKS:
• Close right door assembly.
4-167
