TM 5-4310-452-14
4-86. COMPRESSOR OIL LINES, HOSES, AND FITTINGS REPLACEMENT (Con't).
4.
Install elbow (21) in oil separator (20). Install elbow (12) and new preformed packing (11) in oil temperature
bypass valve (10). Connect tube assembly (22) to elbows.
5.
Install pipe bushing (19) and adapter (18) in oil separator (20). Install scavage tube assembly (17) in adapter.
6.
Install elbow (16), filter (15), pipe coupling (14), and check valve (13) on scavage tube assembly (17).
7.
Install elbow (8) and new preformed packing (7) in oil filter assembly (1). Connect hose assembly (9) to elbow
and check valve (13).
8.
Install new preformed packing (2) and adapter (3) in oil filter assembly (1), Install new preformed packing (6) and
adapter (5) in oil temperature bypass valve (10).
9.
Connect tube assembly (4) to adapters (3 and 5).
FOLLOW-ON TASKS:
• Fill oil separator (see LO 5-4310-452-12).
• Fill compressor oil cooler (see LO 5-4310-452-12).
• Close left and right door assemblies.
• Close access door assembly.
4-173
