TM 5-4310-452-14
Section V. ENGINE LUBRICATION SYSTEM MAINTENANCE
Paragraph
Page
Number
Title
Number
4-17
Oil Cooler Replacement ......................................................................................................... 4-29
4-18
Engine Oil Filter Element Replacement .................................................................................. 4-31
4-19
Oil Filter Base Assembly Replacement .................................................................................. 4-33
4-20
Oil Line Replacement ............................................................................................................. 4-35
4-17. OIL COOLER REPLACEMENT.
This Task Covers:
a.
Removal
c. Installation
b.
Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Engine off.
One gasket
Left door assembly open.
Cooling duct and stay plate removed (see
Tools/Test Equipment
paragraph 4-34).
General mechanic's tool kit
a.
REMOVAL
1.
Loosen 2 fittings (4), Remove 2 bolts (2) and 4
washers (3) from oil cooler (1).
2.
Unscrew 2 fittings (4) and remove oil cooler (1).
3.
Remove gasket (6) from bottom of oil cooler (1).
Discard gasket.
b.
INSPECTION
1.
Inspect oil cooler (1) for cracks, bends, breaks, or
leakage. Replace oil cooler if damaged.
2.
Inspect compression sleeves (5) for cracks or
damage. Replace compression sleeves if cracked
or damaged.
c.
INSTALLATION
1.
Install new gasket (6) on bottom of oil cooler (1).
2.
Position oil cooler (1) on engine and tighten 2 fittings (4).
3.
Install 2 bolts (2) and 4 washers (3) in oil cooler (1).
TA505431
1
4-29