TM 5-4930-207-34
Figure 4-2. Cylinder and pistone, removal, disassembly, reassembly, and installation.
CENTRIFUGAL UNLOADER
Section III.
4 - 9 . General
4-11. Centrifugal Unloader Inspection
and Repair
The centrifugal unloader automatically opens a
a. Inspection
valve releasing compression from the compressor
(1) Inspect tube assembly and fittings for
cylinders and intercooler each time the compres-
worn or damaged screw threads, cracks, dents,
sor stops.
sharp bends, and other defects.
(2) Inspect housing and cover for cracks
4-10.
Centrifugal Unloader
Removal
and other damage.
a n d Disassembly
b. Repair. Repair by replacing damaged parts.
For removal and disassembly of the centrifugal
4-12. Centrifugal Unloader Reassembly
unloader see figure 4-3, illustrated in numerical
a n d Installation
sequence breakdown.
Refer to figure 4-3 for reassembly and installa-
tion. Replace gaskets.
4-3
