Figure 3-13. Wheels, removal and installation.
(2) Inspect for cracks, breaks, excessive
and install the wheel bearings, hub and brake-
wear, and other damage.
drum.
(3) Replace a damaged or defective wheel.
(2) Install the wheels (para 3-72).
stall the wheels.
a. Removal.
(1) Remove the wheels (3-72).
a. Removal and Disassembly.
(2) Refer to TM 9-1870-1 and remove
(1) Remove the wheels (para 3-72).
the tires and tubes.
(2) Refer to figure 3-14 and remove and
b. Cleaning and Inspection.
disassemble the wheel bearings, hub and brake-
drum.
(1) Clean the tires and tubes with a solu-
tion of warm water and soap.
b. Cleaning, Inspection and Repair.
(1) Clean all parts with an approved
(2) Inspect for cute, cracks, breaks, and
cleaning solvent and dry thoroughly.
other damage.
(2) Inspect for cracks, breaks, scoring,
(3) Replace a damaged or defective tire
excessive wear, and other damage.
and tube.
(3) Replace a damaged or defective part.
c. Installation.
(4) Refer to LO 6-4930-217-12 and lu-
(1) Refer to TM 9-1870-1 and install the
bricate wheel bearings.
tires and tubes.
c. Reassembly and Installation.
(1) Refer to figure 3-14 and reassemble
(2) Install the wheels (para 3-72).
