TM 55-1905-223-24-8
2-23.
Replace/Repair Bearing Carrier Group. (FIGURE 2-15)
This task covers:
a. Removal,
b. Repair,
c. Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
tagged, "Out of Service-Do Not
Torque wrench kit,
Operate."
P/N 3377216
Unloader assembly removed
Materials/Parts
Oil gauge P/N 110822
Bearing carrier group
P/N 160065
Gasket P/N 6679
Fluid filter element P/N 110814-001
Wiping rag, Item 3, Appendix C
REMOVAL
a.
Remove the eight 3/8-inch hex bolts (8) from the bearing carrier group (1).
b.
Pull bearing carrier group (1) out and then upward to clear the oil pickup tube (6). Beair g carrier gasket (2)
n
will fall free.
c.
Bearing sleeve (3) will remain in bearing carrier group (1).
REPAIR
Repair consists of replacing the oil gauge (11), fluid filter element (9), and oil tube gasket (7).
a.
Replace oil gauge (11).
(1) Remove oil gauge (11) from oil pump housing (10).
(2) Install new oil gauge (11) in oil pump housing (10).
Change 1 2-46
