TM 9-4310-397-14
4-47. HOSE REEL REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit
Curbside doors open.
Item 1, Section III, Appendix B
a.
Removal.
(1)
Hose Reel.
(a) Unwind hose assembly from reel.
Figure 4-44. Hose Reel Assembly
(b) Disconnect coupling (Figure 4-44, 1) and (2) by twisting apart.
NOTE
Hose assembly need only be disassembled if replacement of component parts is required.
(2)
Hose Assembly. Remove four hex nuts (3) and square head screws (4) from clamp assemblies (5) to remove
couplings (2) and (6) from hose (7).
4-121
