TM 9-4310-397-14
4-52. COMPRESSOR OIL COOLER REPLACEMENT. - Continued
(3)
Replace caution plate (4) if damaged.
(4)
Remove hex head screws (5), flat washers (6), and self locking nuts (7), from radiator support (8).
Discard self locking nuts.
(5)
Support oil cooler and remove four hex head screws (9), eight flat washers (10), four lock nuts (11) and
radiator support (8). Discard lock nuts.
(6)
Carefully lift oil cooler (12) from unit.
NOTE
Remaining radiator support may be removed at this time if it is damaged.
b.
Installation.
(1)
Position oil cooler (12) and radiator support (8).
(a)
A line holes on radiator supports (8) and oil cooler (12).
(b)
Install with four hex head screws (9), eight flat washers (10), and four lock nuts (11) (item 13, appendix H).
(2)
Install radiator support (8) onto frame with four hex head screws (5), flat washers (6), and new self locking nuts
(7) (item 13, appendix H).
(3)
Position shroud (3) and install eight hex washer head bolts (2), and new lock nuts (1) (item 3, appendix H).
(4)
Install oil cooler hoses per paragraph 4-50.
(5)
Install radiator. See paragraph 4-51.
4-134
