TM 9-4310-397-14
6-9.
CAMSHAFT, AND TIMING GEAR TRAIN. - Continued
CAUTION
Do not allow camshaft lobes to drag on the honed bearing surfaces while
installing cam-shaft. Machine surfaces may become scratched or scored.
(e)
Install camshaft (Figure 6-61, 1) and thrust plate (2) in cylinder block.
Figure 6-61. Install Camshaft
(f)
Install cap screws and torque 35 ft-lb (50 Nm).
(g)
Turn camshaft until timing mark (Figure 6-62, 1) is under Timing Tool (item 19, section III, appendix
B).
Figure 6-62. Timing Mark
6-52
