TM 5-4220-227-14
4-26. Cot Assemblies (I/L).
This task covers:
Replace
INITIAL SETUP
Tools
Materials/Parts
General Mechanic's Tool Kit
Cot Assemblies
(NSN 5180-00-177-7033)
Replace. (figure 4-8)
NOTE
There are two cot assemblies in the chamber. Replacement of each is the same.
(1)
Remove two hinge pins (1) securing cot supports (2) to support angles (3).
(2)
Remove bolt (4) and ground strap (5).
(3)
Remove three bolts (6) and two clamps (7) and remove cot assembly (8).
(4)
While holding cot assembly (8) in place, install two clamps (7) and secure with three bolts (6).
(5)
Install bolt (4) and ground strap (5).
(6)
Install two hinge pins (1) securing cot supports (2) to support angles (3).
4-26
