TM 5-4220-227-14
4-33. Scrubber Assembly.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Chamber shut down (para. 2-15).
(NSN 5180-00-177-7033)
Heater/chiller unit removed (para. 4-28).
Materials/Parts
Scrubber Assembly
Bag, Plastic (Item 3, Appendix E)
Band, Rubber (Item 4, Appendix E)
Replace. (figure 4-16)
(1)
Unlatch two latches (1) and remove scrubber canister (2) and gasket (3).
(2)
Disconnect electrical lead (4).
(3)
Remove four bolts (5) and washers (6) that secures adapter plate (7) to bracket (8) and remove adapter plate.
(4)
Remove four nuts (9) and lockwashers (10) and remove scrubber assembly (11) and bushings (12).
(5)
Install scrubber assembly (11 ) and four bushings (12) on adapter plate (8) and secure with four lockwashers (10)
and nuts (9).
(6)
Install adapter plate (7) on bracket (8) and secure with four bolts (5) and washers (6).
(7)
Connect electrical lead (4).
(8)
Install gasket (3) and scrubber canister (2) on scrubber assembly (11) and secure with two latches (1).
(9)
Check operation of scrubber fan.
FOLLOW-ON MAINTENANCE
Install heater/chiller unit (para. 4-28).
4-42
