TM 5-4220-227-14
4-38. Double Light Power Supply (Inner Lock).
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Chamber shut down (para. 2-15).
(NSN 5180-00-177-7033)
Materials/Parts
Double Light Power Supply
Fuses
a. Replace. (figure 4-21)
(1)
Unlatch two latches (1), open hood assembly door (2) and install two supports (3) and pins (4).
(2)
Remove electrical plug (5) from six plug receptacle power strip (6).
(3)
Remove two electrical connectors (7) from two light sources (8).
(4)
Remove four screws (9) and remove double light power supply (10) from control panel (11).
(5)
Install double light power supply (10) into control panel (11) and secure with four screws (9).
(6)
Install two electrical connectors (7) on two light sources (8).
(7)
Install electrical plug (5) into six plug receptacle power module (6).
(8)
Remove two pins (4), supports (3), close hood assembly door (2) and secure with two latches (1).
4-52
