TM 5-4220-227-14
4-40. Single Light Power Supply (Outer Lock).
This task covers:
a.
Replace
b.
Repair
INITIAL SETUP:
Tools
Materials/Parts (Cont)
General Mechanic's Tool Kit
Distilled Water (Item 9, Appendix E)
(NSN 5180-00-177-7033)
Cloth, Lint-free (Item 6, Appendix E)
Materials/Parts
Equipment Condition
Single Light Power Supply
Chamber shutdown (para. 2-15).
Detergent, Nonionic (Item 8, Appendix E)
a.
Replace. (figure 4-25)
(1)
Unlatch two latches (1), open hood assembly door (2) and install two supports (3) and pins (4).
(2)
Remove electrical plug (5) from six plug receptacle power strip (6).
(3)
Remove electrical connector (7) from light source (8).
(4)
Remove two screws (9) and remove single light power supply (10) from control panel (11).
(5)
Install single light power supply (10) into control panel (11) and secure with two screws (9).
(6)
Install electrical connector (7) on light source (8).
(7)
Install electrical plug (5) into six plug receptacle power module (6).
(8)
Remove two pins (4), supports (3), close hood assembly door (2) and secure with two latches (1).
4-60
