TM 5-4220-227-14
5-22. Fluorescent Light.
This task covers:
Repair
INITIAL SETUP:
Tools
Materials/Parts (Cont)
General Mechanic's Tool Kit
Detergent, Nonionic (Item 8, Appendix E)
(NSN 5180-00-177-7033)
Distilled Water (Item 9, Appendix E)
Materials/Parts
Equipment Condition
Fluorescent Light Assembly
Fluorescent light removed (para. 4-41).
Cloth, Lint-Free (Item 6, Appendix E)
Repair. (figure 5-28)
NOTE
Fluorescent light is partially disassembled when removed.
(1)
Remove lock (1) securing lampholder (2) to fluorescent lamp enclosure (3).
(2)
Remove gasket (4) from enclosure (3).
(3)
Remove 11 screws (5) securing enclosure (3) to housing (6) and separate enclosure from housing.
(4)
Tag and disconnect electrical leads (7) from electrical plug (8).
(5)
Remove starter (9) from starter socket (10).
(6)
Tag and disconnect electrical leads (11) from starter socket (10).
(7)
Remove two screws (12) and washers (13) and remove bracket (14) with starter socket (10).
(8)
Remove two screws (15) and remove starter socket (10) from bracket (14).
(9)
Tag and disconnect electrical lead (16) from ballast (17).
(10)
Remove two screws (18) and washers (19) and remove ballast (17).
(11)
Tag and disconnect electrical band (20) from receptacle (21).
(12)
Remove two screws (22) and remove receptacle (21).
(13)
Clean all components using nonionic detergent cleaner and rinse with clean distilled water.
5-60
