TM 5-4220-227-14
6-19. Motor (CO2 Scrubber Assembly) (Cont).
(15) Install motor assembly stator (13) into stator housing (24).
(16) Connect electrical leads (12) to motor control board assembly (6).
(17) Install male connector (11) in end plate (3) and secure with nut (10).
(18) Install six washers (9) and roller bearing (8) in end plate (3).
(19) Install spacer (7), motor control board assembly (6) on end plate (3), and secure with three screws (5).
(20) Install preformed packing (4), end plate (3) and secure with connector stop (2) and eight screws (1).
FOLLOW-ON MAINTENANCE
Install scrubber assembly motor (para. 5-15).
6-78
