APPENDIX C COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS

Section IV. REMARKS - TM-5-4220-227-14_454

Section II COMPONENTS OF END ITEMS - TM-5-4220-227-14_456

TM-5-4220-227-14 MK12 Surface Supported Diving System (SSDS) (NSN 4220-01-097-5674) Manual
Page Navigation
440

TM 5-4220-227-14 APPENDIX C COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS Section I. INTRODUCTION C-1. Scope. This appendix lists components of end item and basic issue items for the 3-Person Recompression Chamber to help you inventory items required for safe and efficient operation. C-2. General. The Components of End Item and Basic Issue Items Lists are divided into the following sections. a. Section II. Components of End Item. This listing is for informational purposes only, and is not authority to requisition replacements. The items are part of the end item, but are removed and separately packaged for transportation or shipment. As part of the end item, these items must be with the end item whenever it is issued or transferred between properly accounts. Illustrations are furnished to assist you in identifying the items. b. Section III. Basic Issue Items. These are the minimum essential items required to place the 3-Person Recompression Chamber in operation. The illustrations will assist you with hard-to-identify items. This manual is your authority to request/requisition replacement B11, based on TOE/MTOE authorization of the end item. C-3. Explanation of Columns . The following provides an explanation of columns found in the tabular listings: a. Column (1). Illustration Number (Illus Number). This column indicates the number of the illustration in which the item is shown. b. Column (2). National Stock Number. Indicates the National Stock Number assigned to the item and will be used for requisitioning purposes. c. Column (3). Description. Indicates the Federal item name, and, if required, a minimum description to identify and locate the item. The last line for each item indicates the FSCM (in parentheses) followed by the pan number. d. Column (4). Unit of Measure (U/M). Indicates the measure used in performing the actual operational/maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e g, ea, in., pr). e. Column (5). Quantity Required (OTY RQF). Indicates the quantity of the item authorized to be used with/on the equipment. C-1

Privacy Statement
Press Release
Contact