TM 5-4220-233-14
TOTAL TASK-HOUR*
INTERVAL
TASK-HOUR
Q
0.5
S
0.2
* The task-hours time specified is the time you need to do all services prescribed for a particular interval.
NOTES:
1.
Gear oil (per MIL-L-2015) is changed/added at the hub and drum assembly using a hex wrench to
remove the plug. Inspection of the oil level and potential contamination is a daily PMCS task. Changing the oil
is scheduled on a quarterly basis.
2.
There are four (4) grease points on the surge actuator. Grease must be applied every six months, per
MIL-G-10924, or more frequently when severe or dusty conditions exist.
Table 3-1. Lubrication Instructions (Sheet 2)
3-3
